Walk-in Test Chamber Product Information Walk-in Test Chamber

Walk-in Test Chamber

Major Features

- Lots of samples can be tested simultaneously with large Room Chamber.

- we reinforce, design, construct the packing ,between the prefabricated panels and panel, which is the problem of large constant temperature humidity chamber.

- it has excellent cold reserving effect blocking outside cold/hot air because of the self-adhesion of injected Poly-urethane between prefabricated panels and PVC-coated steel.

- It is reducing drudgery by adopting an automatic water supply system for humidifier tank.

Manufacture Specifications

Dimension 2,000(W) X 2,000(D) X 2,000(H) 5,000(W) X 2,000(D) X 2,000(H)
Electric requirement AC 220V/380V/440V, 3ø, 50~60Hz
Material Interior STS304 Polished Plate
Exterior STS304 &Poly-Urethane Panel &PVC Coating Plate
Temp./Humid. working range -40℃ ~ +100℃ / 30 ~ 98% RH
Temp./Humid. controller 5.7” Color LCD Touch Screen Type
Temp./Humid. constancy ±0.5℃ / ±3% RH
Heating time 20℃ ~ +80℃ / 40 min
Cooling time +20℃ ~ -40℃ / 60 min
Air-flow Line Flow Fan(Sirocco Fan)
Refrigeration system Mechanical Pressure Refrigeration System(Air Cooling Type)
Refrigerant R-404A R-404A
Refrigeration capacity 5HP / 7.5HP X 2SET 7.5HP / 10HP X 2SET
Heater capacity 12kW 24kW
Humidity capacity 9kW Pipe Type 12kW Pipe Type
Safety device Overheat Protector, Fan Motor Overload Protector,
Refrigerator Overload Protector, High &Low Pressure Switch, etc.

Head Office / Factory : 44-75, Ungji-ro, Tanhyeon-myeon, Paju-si, Gyeonggi-do, 413-843 Rep. of KOREA
Tel.1588-2516 / 031) 8071-2325 ㅣ Fax.031) 8071-2310
Copyright © 2011 COSTAL. All rights reserved.